Ceiling Fan Tips And Advice
How to code the fan light remote control and related matters needing attention
Addtime: 2022-04-21
Clicks:347

Many families will install ceiling fan lights, which are not only beautiful, but also very powerful. The fan light needs to use the remote control, so how to match the fan light remote control? Next, let the fan light manufacturer Magic Electric take you to solve this problem.




1. How to code the fan light remote control


1. First find the pairing button on the remote control, press and hold the button for about 5-10 seconds, then the red light on the remote control will light up by itself.




2. The remote control is facing the fan light. At this time, it starts to pair independently, and does the internal code clearing process. When the light on the remote control turns green, it proves that the remote control of the ceiling fan light is well matched. Test to see if the ceiling fan light works.



Fan lamp manufacturers

Fan lamp manufacturers




2. Precautions for the use of fan lights


1. Check whether the fan device is reliable before use. The steel bar hook in the ceiling prefabricated panel should be selected. If there is no steel bar in the ceiling, it should be hoisted with a steel bar with a diameter of about 8 mm, and multiple strands of iron wire should be used for hoisting, otherwise it is very dangerous.




2. After the fan has been used for a period of time, check whether the fan lamp hanger, screws, blades, etc. are corroded, rusted, deformed, etc., whether the hanger is firm, and whether the force is good. If there is a problem, it should be repaired in time. In addition, the degree of wear of the screws should be checked regularly, and if there is wear, it should be replaced in time.




3. When installing and testing, pay attention to the situation that no one should be under the fan. At the same time, check whether there is jitter, smoke, peculiar smell, etc. during rotation. If there is, find out the cause and repair it before using it.




4. Many people like to watch the slow file first, thinking that it can save power and protect the parts. It is recommended to start the electric fan with fast gear first. Waiting for a period of time to turn on the slow gear can play a better power saving effect.




5. If the fan light is used continuously for several hours, it is recommended to shut down for a while to dissipate heat before turning it on, so as to prevent the motor from overheating and causing burnout. If there is any abnormality during use, it must be powered off immediately.





Conclusion of the article: The relevant knowledge about how to code the remote control of the fan light is introduced here, and I hope it will be helpful to everyone.



Fan lamp manufacturer-Magic Electric Co., Ltd. is a professional team integrating design, research and development, production and marketing. Its products include fan lights, decorative ceiling fans, lighting, home appliances and hardware accessories processing. Since its establishment, it has been adhering to the original intention of "making the world full of magic", constantly introducing innovative technology and design and development, creating strong technical force, improving the quality of employees, and strictly controlling the quality of products. People from all walks of life are welcome to consult and understand.





(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)


Wanna Get A Prompt Quotation For Your Project?
Copyright © MagicPower Electrical-江门市魔力电器有限公司  粤ICP备19152605号